 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Map Holder Installation Instructions |
The Map Holder will install on most mountain bikes with traditional flat or riser bars.
1. Remove clamp bolts from the map holder and clamps
2. Open the clamps and place them around the bars with the flat piece of the
clamp on top.
3. Place the bolt through the clamp from the back to the front so as the bolt head
is closest to the rider
4. Pass the bolt through the map holder so as the map holder is held in front of the
handle bar as shown in the picture below.
5. Be sure not to clamp any cables or computer wires.
6. Adjust the angle of the map holder to suit your viewing position and then tighten
the nut and bolt so as the map holder is held firmly in position.
7. If the map holder is not held tightly enough cut pieces of the rubber strip and
place it between the clamp and the handle bar to prevent movement.
8. Attach the map to the map holder using the elastic strap. The map should be
folded to provide the best view of the terrain that you will be navigating.
To avoid accidents the map should not be studied while moving, always look where you
are riding and avoid hitting obstacles in the road.
1. Remove clamp bolts from the map holder and clamps
2. Open the clamps and place them around the bars with the flat piece of the
clamp on top.
3. Place the bolt through the clamp from the back to the front so as the bolt head
is closest to the rider
4. Pass the bolt through the map holder so as the map holder is held in front of the
handle bar as shown in the picture below.
5. Be sure not to clamp any cables or computer wires.
6. Adjust the angle of the map holder to suit your viewing position and then tighten
the nut and bolt so as the map holder is held firmly in position.
7. If the map holder is not held tightly enough cut pieces of the rubber strip and
place it between the clamp and the handle bar to prevent movement.
8. Attach the map to the map holder using the elastic strap. The map should be
folded to provide the best view of the terrain that you will be navigating.
To avoid accidents the map should not be studied while moving, always look where you
are riding and avoid hitting obstacles in the road.
Mounting Bracket
Map Holder Correctly Mounted on Bike
 |